Right Thread Upsetting Rebar Coupler
High Tensile & yield strength, reach JGJ107, ACI318, BS8110, DIN1045 and UBC1997 etc.
Technical Parameter:
| Model | Outer Diameter(mm) | Length (mm) | Thread Pitch(mm) |
| Φ16 | Φ27 | 40 | M20*2.5 |
| Φ18 | Φ31 | 44 | M22*2.5 |
| Φ20 | Φ33 | 48 | M24*3.0 |
| Φ22 | Φ37 | 52 | M27*3.0 |
| Φ25 | Φ41 | 60 | M30*3.5 |
| Φ28 | Φ47 | 66 | M33*3.5 |
| Φ32 | Φ54 | 72 | M36*4 |
| Φ36 | Φ59 | 80 | M39*4 |
| Φ40 | Φ64 | 90 | M45*4 |
Photos:
Tensile Test:
Packing:
Application: It is used to connect threaded rebar.
1. Use solid 45# carbon steel as raw material
2. Splice rebar of HRB335, HRB400 & HRB500 etc.
3. High Tensile & yield strength, reach JGJ107, ACI318, BS8110, DIN1045 and UBC1997 etc.
4. Easy operation & environmentally friendly.
5. Could be used in the every orientation connection of reinforcing bars with same or different Diameter.
6. Good low temperature resistance, and could pass the -40 degree low temperature test
Packing: Woven bag firstly, and then into pallet
Product Name: Right Thread Upsetting Rebar Coupler
